background

Scrap

about

Elan InterTrade has direct yard sources from Uk/Brazil for importing quality ferrous scraps into India. We are importing around 5000 - 7500 MT per month of different grades of scrap at various ports across the country like Nhava Sheva, Mundra, Ludhiana, Kandla, etc. Our customers include some of the most reputed names in the steel industry like Welspun Steel, Saarloha Advanced Materials (Formerly Kalyani Carpenter) Vardhman Special Steel, Mahindra Sanyo, etc. Currently we are importing following grades of scrap into India:

HMS 1: Heavy melting steel scrap as per below ISRI Grades.

ISRI 200 No. 1 heavy melting steel. Wrought iron and/or steel scrap ¼ inch and over in thickness. Individual pieces not over 60 x 24 inches (charging box size) prepared in a manner to insure compact charging.

ISRI 201 No. 1 heavy melting steel 3 feet x 18 inches. Wrought iron and/or steel scrap ¼ inch and over in thickness. Individual pieces not over 36 x 18 inches (charging box size) prepared in a manner to insure compact charging.

ISRI 202 No. 1 heavy melting steel 5 feet x 18 inches. Wrought iron and/or steel scrap ¼ inch and over in thickness. Individual pieces not over 60 x 18 inches (charging box size) prepared in a manner to insure compact charging.

HMS ½: Heavy melting steel scrap containing HMS 1 & HMS 2 in the ratio of 80:20 or 90:10 respectively. HMS 2 would contain wrought iron or steel scrap, black and galvanized, 1⁄8 inch (3.175 mm) and larger in thickness as per ISRI grades 203, 204, 205 & 206. It may contain automotive scrap except for thin gauge material.

Shredded Scrap ISRI 211: Homogeneous iron and steel scrap magnetically separated, originating from automobiles, unprepared No. 1 and No. 2 steel, miscellaneous baling and sheet scrap. Average density 70 pounds per cubic foot.

PNS Scrap ISRI 231: Cut structural and plate scrap, 5 feet and under. Clean open hearth steel plates, structural shapes, crop ends, shearing’s, or broken steel tires. Dimensions not less than 1 /4 inch thickness, not over 5 feet in length and 18 inches in width. Phosphorus or sulphur not over 0.05 percent.

Blue Steel Scrap: Blue Steel is type of scrap which consists of cut pieces generated from fabrication units; cut pieces of new D-Bars from cut & bend units and cut pieces of other items like Billets, Bloom, structural steel, plates, stampings, forgings, etc.

Turnings Scrap: Clean steel turnings, free of iron borings or excessive oil, containing not more than 0.05 percent phosphorus or sulphur, and free of alloys. May not include badly rusted or corroded stock.

Cast Iron Scrap: All grades of cast iron except burnt iron. Dimensions not over 24 inches x 30 inches and no piece over 150 pounds in weight. Currently we are importing approx. 6000 MT /annum and plan to gradually increase it to 10000 MT / annum.